FLOOR / CEILING PANELS
HOW DID IT BEEN DONE?
Classic floor panel module of wood-metal beams.
Technical specifications:
Payload 1.5 kN / m2 and 2.0 kN / m2
The thicknesses of the module can be as follows: 278 mm, 328 mm, 398 mm. Standard width 1200 mm, The maximum length depends on the height of the module
Top covered with OSB3 board with a thickness of 18 mm, bottom with OSB3 board with a thickness of 10 mm
FLOOR HEATING AND SOUND INSULATION
Wood floor with concrete floor properties
Technical specifications:
A layer of concrete with a thickness of 50 mm adds 137 kg / m2 to the beams. Therefore, the installation of beams is usually one third denser than without concrete. OSB3 board thickness is not less than 18 mm. Significantly improves the soundproofing of the floor.
ROOF CEILING
Using roof panels saves time and money
Thickness of pnees up to 400 mm, width up to 1.8 m.
We use stone wool or PUR foam for insulation.
Roof panel with a thickness of 350 mm and insulated with stone wool U-number 0.9 W / m2 * K
When insulated with PUR foam, this figure is even better. The slope of the roof can be according to the project